Automatic Hand Sanitizer Gel Dispenser
Automatic Hand Sanitizer Gel Dispenser
This automatic hand sanitizer gel dispenser for wall mounting is made of high resistance ABS. It is able to hold 1,100ml of hand sanitizer and dispense 1ml of gel per dosage.
The dispenser is equipped with an automatic sensor to avoid physical contact, an ideal "touchless" system. The valve is designed for use with hydroalcoholic gels.
You will have to remove your hand and place it again for the next dose of hand sanitizer gel. It is fixed to the wall from the back of the soap dispenser using four 4mm wall plugs and steel fixing screws, each of them marked at the rear of the product.
Operation
To fill the dispenser, open the lid and introduce the gel disinfectant directly. Each time the refilling process is done, repeatedly press the inner bottle button so that the disinfectant flows to the valve. Place your hand under the sensor for a dosage of 1ml. If the hands are not removed, the dispenser will stop automatically after 10 dosages. The front display indicates when to refill the dispenser.
Features
- Size: 106x140x188mm
- Modern design
- Used for Gel Hand Sanitiser only (not included)
- Volume: 1,100ml
- Output: 1.5 ml
- Electronic Infra-red Sensor Operated
- Includes Vandal-proof screws and plastic plugs
- Color: White
- Uses 4 “AA” batteries (not included) with a lifetime of approx. 60,000 cycles.
- Includes a key to open the cover
- Made in Barcelona, Spain
- Available to buy online for collection, delivery within Nairobi/Mombasa or countrywide delivery across Kenya.
Product Specifications
| Type | Sanitizers |
|---|---|
| Colour | White |
| Height (mm) | 256 mm |
| Length (mm) | 106 mm |
| Width (mm) | 140 mm |
| Finish / Texture | Glossy / Shiny |
| Brand | Genwec |
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.
Components:
- Installation Holes For Screws
- Switch
- Pump
- Sensor
- Outlet
- Bottle For Gel
- Cap For Bottle
- Battery Cover
Installation:
- Follow the Steps 1 and 2, first unlock and open the front cover with the key provided as shown in (Figure 2).
- Drill 4 holes of 6mm diameter as shown in (Figure3), and fix the dispenser on the wall with the plugs and screws included in the box.
Battery Installation:
- Install 4X AA (LR6) batteries into the battery box, make sure you follow the “+” “- ” terminals. Put the battery cover back and push to close the cover. (Figure 4).
Refill - Sanitizer or Gel:
- Unlock and open the cap, refill the container and close the cover. The maximum volume is 1100 ML.
Application:
- When you open the front cover, the dispenser is powered-off and will not work. Close the front cover and the dispenser will power on and can be used.
- During the first time to use, place your hand under the dispenser several times to exhaust the air in the pump and for the liquid to start flowing.
- Place your hands 0-8 cm under the sensor at the bottom. The dispenser will dispense automatically. It dispenses 1 ml each time. When the hand is not removed from the sensor field, it will dispense every 3 seconds until it dispenses 10 times in a row to avoid misuse.