CTM Kenya - Soft Spa White Freestanding Acrylic Spa Bath

Product Specification

Brand	Formina
Colour	White
Type	Spa Bath
Depth	400 mm
Height (mm)	540 mm
Length (mm)	1900 mm
Width (mm)	1100 mm
Volume	220 L
Waste Size	52 mm
Overflow Size	41 mm
Product Weight	25 kg

About the Product

Treat yourself to a rejuvenating soak in this large, luxurious soft bath with hydro massage. Six large and ten small jets create a spa-like ambience. Finished in glossy white sanitary acrylic, the bath can accommodate two people with room to spare. The material is easy to care for as well as shock-resistant. The chic chromed fittings and black leather back/headrests add a contemporary touch. The tub water volume is 220 litres.

A relaxing retreat in the cosiness of your own home.

Features:

Size: 1900 x 1100 x 540mm.
Type: Freestanding acrylic bathtub.
Made in Turkey.
Easy to Install and maintain.
Color: White.
Includes Overflow.
Motor - Wendy Whirlpool Pump (WPOL 600).
Motor Supply Voltage: AC 220-240V 50Hz 750W.
Motor Plug - 13AMP.
Motor Water proofscale: IP44.

Note: This bathtub should be installed by a qualified contractor or plumber.

Complete The Look

How to install

1. Unpack Your New Freestanding Bath From The Carton

- You will need the following for the installation:

Spirit Level
Adjustable wrench
Plumbing tape
Rubber Mallet

- Ensure the Freestanding Bath does not come in contact with a rough surface or sharp object as this will cause scratches.

- Measure and make markings on the wall with a pencil.

- Place the freestanding bath in position on the marked surface.

- This area should be dry, clean and free of debris.

2. Adjust Level Of The Bath

- Use the spirit level to adjust the self-leveling feet such that the entire bath is level.

- The water will drain efficiently only if the bath is perfectly level.

- Please ensure the legs are adjusted in line with the base of the bath.

- Make sure area under the bath is clear of dirt and tools.

- Take care not to damage bath exterior during positioning.

3. Connect Bath To The Waste Outlet

- You can now connect the bath drain popup to the waste outlet. You can also now connect the cold and hot water inlet to the bath. Make sure to use plumbing tape to make sure all threaded connections are water tight.

- When connecting the flexible tubes, ensure these are not bent or twisted as this will slow down the water flow in the drain and water inlets.

- Turn on the main water supply to your taps, if you have not already done so.

4. Complete Installation and Test.

- Remove the thin masking plastic from the bath.

- Open the taps and fill the bath with water slowly while constantly checking the waste outlet and water inlets for any leaks.

- Apply a thick line of silicone around the perimeter base of the bath in order to water proof it.

- Allow 24 hours for this to set and dry completely.

Note: The above is just a quick guide. If you are unsure about the installation than you can seek help from a qualified plumber or contractor.

Click & Collect

Ready when you are!

Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.

Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.

Soft Spa White Freestanding Acrylic Spa Bath - 1900 x 1100 x 540mm

Area(s) to be tiled

SummaryHelp