Tivoli Shower Rail Set With 1 Spray Handshower

Product Specification

Brand	Tivoli
Colour	Chrome
Height (mm)	680 mm
Length (mm)	60 mm
Width (mm)	60 mm

About the Product

This premium new Tivoli Shower Slider Rail Kit is perfect for upgrading your shower. The kit consists of a 680mm tall shower rail, a 1500mm flexible hose and a luxury 80mm Single-function Spray hand shower.

The shower head offers you a luxurious one spray rain-spray with the feeling of an invigorating rain shower. The shower head and slider kit are finished with a maintenance friendly, shiny chrome coating.

Features

Brand: Tivoli.
Finish: Chrome.
Shower Head Diameter: 80mm.
Easy to clean thanks to the shiny chrome coating and rub clean nozzles.
6 litre/min flow limiter.
With white diffuser – no limescale build-up on your shower head and helps spread of the water through all the nozzles.
With 1 Spray Hand shower
Shockproof silicone ring protects the shower head damage caused by falling.
Made in Italy.

How to install

Step 1. Turn Off Your Water and Remove Your Old Tap

Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
Make sure all your taps remain open to prevent an air lock. If you have angle valves connected than you can simply switch these off and do not need to turn off the mains.
Get under your basin and unscrew the nut that locks the basin to your old tap.

Step 2. Unbox Your New Tap

Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
Make sure you connect the flexi connectors firmly to your tap first, then feed into the basin hole, so your tap sits on top of your basin. This makes it much easier to install, with the flexi connectors poking out below.
There may be a rubber washer included with the tap to make sure the tap sits firmly. Screw the nut tightly onto the threads at the bottom. Make sure your tap is now gripped on to your basin and does not shake.

Step 3. Connect To Water Outlets

You can now connect the other end of the flexi connectors to the wall water outlets. Keep in mind which connects to the hot and cold water.
If your tap comes with a pop-up waste then you will need to assemble the popup and rod to the tap first and adjust the length to fit your basin.

Step 4. Checks and Precautions

We recommend you use a plumbing tape for all the threaded connections
Make sure all the flexi connectors are not tangled or bent.
Close all connectors tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable.
Check all connections and the pop-up waste for any leaks. You can also push the rod up and down to test and make sure the popup opens and closes.
Turn the tap on and make sure the water is mixing equally and water running smoothly.

Step 5. Installation Complete

Once the water is running and no leaks are found the installation is complete.
Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
Now you can enjoy your brand new tap.

Click & Collect

Ready when you are!

Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.

Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.