COTTO Dhobi White Drop-In Basin - 620 x 480 x 255mm
COTTO Dhobi White Drop-In Basin - 620 x 480 x 255mm
COTTO Dhobi White Drop-In Basin - 620mm
A perfect fit for your utility or laundry room, you can wash anything in here. The practical deep one bowl size of this sink is also ideal for washing items that are just too big for the washing machine. This ceramic kitchen/bathroom basin is also known as a Dhobi Sink and is mainly used on outdoor work tops where clothes are hand washed.
A similar model is available in a smaller size option. See the matching products section below.
Features:
- White Glossy ceramic finish.
- Rectangular vitreous china laboratory (Laundry) sink with overflow.
- Drop-in Counter installation.
- Bowl capacity - 29 litres.
- Scratch resistant & heat resistant.
- Brand: COTTO.
- Colour: White.
- Material: Ceramic.
- No tap hole.
Product Specifications
| Brand | COTTO |
|---|---|
| Height (mm) | 255 mm |
| Length (mm) | 480 mm |
| Width (mm) | 620 mm |
| Depth | 255 mm |
| Waste Size | 45 mm |
| Overflow Size | Built-in Overflow |
| Centre Tap Diameter | No Tap Hole |
| Colour | White |
| Type | Drop In Basin |
| Product Weight | 23,9 kg |
Step 1. - Mark The Area Of The Sink
- Carefully place the Dhobi sink upside down on the kitchen/laundry counter.
- Draw a line around the dhobi sink making sure the dhobi sink edge is parallel to the counter edge.
Step 2. - Place Cutting Template
- Place the paper template provided with the basin on top of the counter and secure it with masking tape or office glue.
- Align this template with the line you had drawn earlier in Step 1.
- Cut out the template along the dotted line using a scissor or box cutter as shown on the template. It is important to mark the hole for the tap on the counter if you will be using a pillar tap.
Click below to download a soft copy of the desired paper template for your basin.
Step 3. - Cut Hole For The Dhobi Sink
- Using the electric jigsaw, cut the hole along the straight cut lines on the template.
- Once the hole is cut and the sink fits you can remove the paper template.
- Before you install the dhobi sink please make sure you have drilled the hole on your counter for a pillar sink mixer. If your sink mixer is a wall type then you do not need to drill this hole.
Tip : Install the waste/drain into the dhobi sink before dropping it into the cut hole. This will be easier to do now. Make sure you apply silicon around the waste for a water tight seal.
Step 4. – Lower The Dhobi Sink In Place.
- Apply a bead of silicone around the edge of the hole and the edge of the dhobi sink from the inside.
- Drop the dhobi sink in place and apply even pressure on all sides.
- Make sure there are no gaps in between the counter and dhobi sink.
- Remove and wipe out any excess silicone that sips out.
- Now you can connect your bottle trap to the dhobi sink waste.
- You can than connect the bottle trap to the sewage drain.
Step 5. – Installation Complete.
- Your dhobi sink installation is now complete.
- Wait 24 hours for everything to dry and then open the water to check for any leaks.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.