Pro Care Ultra 1 Litre

For removal of grease, oils and dirt from tiled surfaces
SKU
EZCHEM301
KES 599
Quantity

PRO CARE ULTRA is a potent alkaline degreaser which, when correctly diluted, has been formulated to remove grease, oils and dirt from all types of tiled surfaces.

It may also be used to neutralize surfaces after they have been acid washed with PRO CARE OFF. This product is also suitable for heavy duty cleaning applications e.g. factories garages etc.

Instructions

  • Apply PRO CARE ULTRA to a small area first, to ensure the product does not damage the tile.
  • Prepare the surface by sweeping, vacuuming, or dusting. Mask off any adjacent surfaces that need to be protected.
  • Mix the correct dilution and apply using a mop or watering can and allow the solution to soak for 10 – 15 minutes and begin loosening the residues. Do not allow the solution to dry on surface.
  • Scrub difficult to remove areas with a nylon bristled brush or broom taking care not to damage the tiles.
  • Rinse the surface well with clean fresh water.
  • Inspect the surface after it has dried. Repeat if necessary.

Precautions

  • Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
  • Rubber gloves should be used when applying PRO CARE ULTRA. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
  • Keep PRO CARE ULTRA away from pets and children.
  • Do not ingest.

Dilution

High strength 1-part PRO CARE ULTRA:: 5 parts water Heavily soled surfaces and industrial applications.
Medium strength 1-part PRO CARE ULTRA:: 10 parts water Surfaces soiled with grease and oils.
Low strength 1-part PRO CARE ULTRA:: 20 parts water General cleaning and neutralizing after acid washing