Tivoli Chrome 200mm Square Shower Head
Tivoli Chrome 200mm Square Shower Head
The Tivoli Chrome shower head will complement any edgy, modern design theme in the bathroom.
The overhead shower is made from ABS plastic and then chrome plated. This modern method of production means that the shower head will not be hot to the touch and that the chrome plating will not easily peel.
This shower head is equipped with a pivot ball joint that allows a degree of rotation to either side - simply point the shower rose where you would like it.
When using the shower, the flow rate achieved is tested at 0.3 MPa and is 6 l/min. The Italian quality, design aspects and craftsmanship of this shower range are outstanding.
Please note that the packaging excludes the shower arm.
Features
- Single jet shower head - Rain spray
- Transparent nozzles
- Easy clean system anti-limestone
- Diffuser Size 200 x 200 mm – plastic chrome
- Water usage: 15 lt/m at 3 bar pressure
Product Specifications
| Brand | Tivoli |
|---|---|
| Type | Shower Heads |
| Colour | Chrome |
| Length (mm) | 200 mm |
| Width (mm) | 200 mm |
How To Change Your Shower Head
1. Gather The Tools You Will Need:
- Adjustable Wrench.
- Teflon/Plumbers Tape.
- New Shower Head.
2. Turn Off The Water Supply:
Locate the water shut-off valve for the shower head and turn it clockwise until it's fully closed. This will prevent water from flowing while you are changing the shower head.
Unscrew the shower head from the shower arm using an adjustable wrench in a counterclockwise motion.
Make sure any dirty water or debris are taken out of the shower arm.
Use a clean cloth or towel to wipe any debris or residue from the shower arm threads. Ensure it's clean and free of any old Teflon tape.
3. Fix The New Shower Head:
Wrap some new Teflon/Plumbers Tape around the shower arm threads. Make sure you cover all the threads.
If your shower head came with a rubber washer make sure the washer has been placed firmly in the shower head female threaded connection.
Screw in your new shower head onto the shower arm in a clockwise motion.
Use your hand initially to tighten it, then use the adjustable wrench to give it a final snug fit. Be careful not to overtighten the shower head.
4. Turn On The Water Supply:
Slowly turn the water supply back on or activate the shower mixer to restore the water flow. Check for any leaks around the connection between the shower arm and the new shower head.
Turn on the shower to max water flow to verify that the new shower head is functioning properly. Check for any leaks or drips again and adjust the position of the shower head if necessary.
That's it! You've successfully replaced your existing wall mount shower head. Enjoy a refreshing shower with the new shower head.
Ready when you are!
Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.
Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.