Navona Luxe Bronze Rainshower Combination

3 In 1 Solution
SKU
KOBWM501127

Navona Luxe Bronze Rainshower Combination

3 In 1 Solution
SKU
KOBWM501127
KES 39,989
Online Shopping with CTM is Safe & Reliable
About

Enjoy a traditional shower with this beautiful Navona Luxe Rainshower Combination. This shower column is a stunning addition to your bathroom. This 3-in-1 solution includes a shower head, hand-held telephone shower, and a spout for a complete showering experience.

Featuring a traditional Victorian finish and design, it offers sturdiness in a busy bathrooms, whilst creating a statement.

The shower head provides a soothing and invigorating shower experience with a rain-like spray pattern, while the hand-held telephone shower is perfect for more targeted cleaning. The spout also allows for easy filling of buckets or other containers. The Bronze Shower Column is not just beautiful, but also practical and functional.

Easy to install with minimal effort, this shower column is sure to impress. Add a touch of elegance and sophistication to your bathroom with this beautiful shower column. It's fixed rainfall shower head, slim valve and stylish crosshead handles will ensure lasting luxury and relaxation in the shower.

Features

  • Traditional, 3-in-one shower column system.
  • Warm, bronze finish.
  • Product Type - Shower Column.
  • 1/4 turn* dual knobs for (H) HOT and (C) COLD water.
  • 3 function knob control allows you to switch water between shower head, telephone shower and spout.
  • Height - 1362mm (extendable).
  • Width - 206mm.
  • Includes traditional hand held telephone shower and hose.
  • Fixed shower head ∅ 200mm diameter.
  • Fixed spout at the bottom.
  • Hand held shower head ∅ 55mm diameter.
  • Hand held telephone shower contains a screw to open the head for cleaning.
  • Quality flexible hose 1500mm (1.5m).
  • Works with a wall water outlet only.
  • All fittings and screws for installation are included in the box.

* - Traditional tap knobs which have a washer take two and a half turns to turn on the water to full pressure. The ceramic discs in a quarter turn knobs are generally more robust and will not need replacing as often as washers in traditional taps. A quarter turn tap can be switched on with just a nudge of an elbow, or the back of the hand.


Step 1. Turn Off Your Water and Remove Your Old Tap

  • Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
  • Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
  • Make sure all your taps remain open to prevent an air lock. If you have angle valves connected than you can simply switch these off and do not need to turn off the mains.
  • Get under your basin and unscrew the nut that locks the basin to your old tap.

 


Step 2. Unbox Your New Tap

  • Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
  • Make sure you connect the flexi connectors firmly to your tap first, then feed into the basin hole, so your tap sits on top of your basin. This makes it much easier to install, with the flexi connectors poking out below.
  • There may be a rubber washer included with the tap to make sure the tap sits firmly. Screw the nut tightly onto the threads at the bottom. Make sure your tap is now gripped on to your basin and does not shake.

 


Step 3. Connect To Water Outlets

  • You can now connect the other end of the flexi connectors to the wall water outlets. Keep in mind which connects to the hot and cold water.
  • If your tap comes with a pop-up waste then you will need to assemble the popup and rod to the tap first and adjust the length to fit your basin.


Step 4. Checks and Precautions

  • We recommend you use a plumbing tape for all the threaded connections
  • Make sure all the flexi connectors are not tangled or bent.
  • Close all connectors tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable.
  • Check all connections and the pop-up waste for any leaks. You can also push the rod up and down to test and make sure the popup opens and closes. 
  • Turn the tap on and make sure the water is mixing equally and water running smoothly.


Step 5. Installation Complete

  • Once the water is running and no leaks are found the installation is complete.
  • Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
  • Now you can enjoy your brand new tap.


 
 
 

Ready when you are!

Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.

Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.