Navona Mini Max Chrome Shower Column - 360 x 200 x 1100mm

3 In 1 Solution
SKU
KOBWM502067

Navona Mini Max Chrome Shower Column - 360 x 200 x 1100mm

3 In 1 Solution
SKU
KOBWM502067

Sorry, this item is currently not available.

Online Shopping with CTM is Safe & Reliable
About

Whether it's the first thing in the morning, or after a long, tiring work day, there is simply nothing better than an uncompromising hot shower under the jets of a hot, invigorating Navona Mini Max Rainshower Combination.

This Rainshower combination offers multi function luxury, acting as a stabilising support to your walk-in and walk-through shower enclosures, it also features a wide shower head area with a flexible hand shower for a heavenly drench.

Note the shower column requires wall water outlet for installation.

Features

  • Height - 1100 - 1500mm (extendable).
  • Projection - 360mm.
  • Width - 150mm.
  • Easy to mount and install.
  • Product Type - Shower Column.
  • Fixed shower head 200mm diameter.
  • Hand held shower head 100mm diameter.
  • Quality flexible hose 1500mm (1.5m).
  • 3 function knob control to divert the flow of water.
  • Works with a wall water outlet only.
  • All fittings and screws for installation are included in the box.
Similar Products

 
 
 

Ready when you are!

Buy Online and we will reserve and pack your order to ensure a speedy collection at your local CTM store. We offer free collections at all our CTM stores countrywide.

Normally, orders will be ready for collection on the same day payment is made and confirmed. For all cheque payments, your order will be processed and dispatched once the cheque is deposited and clears. See all our payment options here.

 

Step 1. Turn Off Your Water and Remove Your Old Tap

  • Before you remove the old tap, you need to first turn off the water supply for both hot and cold water from the mains supply.
  • Then, run the hot and cold taps in your house for a few minutes to drain any excess water and ensure the mains is definitely switched off.
  • Make sure all your taps remain open to prevent an air lock. If you have angle valves connected than you can simply switch these off and do not need to turn off the mains.
  • Get under your basin and unscrew the nut that locks the basin to your old tap.

 


Step 2. Unbox Your New Tap

  • Once the old tap is removed you can unbox your new tap and remove all the accessories from the box.
  • Make sure you connect the flexi connectors firmly to your tap first, then feed into the basin hole, so your tap sits on top of your basin. This makes it much easier to install, with the flexi connectors poking out below.
  • There may be a rubber washer included with the tap to make sure the tap sits firmly. Screw the nut tightly onto the threads at the bottom. Make sure your tap is now gripped on to your basin and does not shake.

 


Step 3. Connect To Water Outlets

  • You can now connect the other end of the flexi connectors to the wall water outlets. Keep in mind which connects to the hot and cold water.
  • If your tap comes with a pop-up waste then you will need to assemble the popup and rod to the tap first and adjust the length to fit your basin.


Step 4. Checks and Precautions

  • We recommend you use a plumbing tape for all the threaded connections
  • Make sure all the flexi connectors are not tangled or bent.
  • Close all connectors tightly and turn the water back on. Please connect the bottle trap to the popup waste if applicable.
  • Check all connections and the pop-up waste for any leaks. You can also push the rod up and down to test and make sure the popup opens and closes. 
  • Turn the tap on and make sure the water is mixing equally and water running smoothly.


Step 5. Installation Complete

  • Once the water is running and no leaks are found the installation is complete.
  • Make sure you use soapy water and a soft clean cloth for regular cleaning of your tap. We do not recommend to use any strong chemicals to clean your new beautiful tap.
  • Now you can enjoy your brand new tap.