Pro Care Heavy Duty Cleaner is a potent alkaline degreaser which, when correctly diluted, has been formulated to remove grease, oils and dirt from all types of tiled surfaces.

It may also be used to neutralize surfaces after they have been acid washed with PRO CARE GROUT REMOVER. This product is also suitable for heavy duty cleaning applications e.g. commercial kitchens, factories, garages etc.

Instructions

• Apply PRO CARE GROUT REMOVER to a small area first, to ensure the product does not damage the tile.
• Prepare the surface by sweeping, vacuuming, or dusting. Mask off any adjacent surfaces that need to be protected.
• Mix the correct dilution and apply using a mop or watering can and allow the solution to soak for 10 – 15 minutes and begin loosening the residues. Do not allow the solution to dry on surface.
• Scrub difficult to remove areas with a nylon bristled brush or broom taking care not to damage the tiles.
• Rinse the surface well with clean fresh water.
• Inspect the surface after it has dried. Repeat if necessary.

Precautions

• Ensure that the above instructions are adhered to at all times and do not adulterate the product in any way as this could cause failure.
• Rubber gloves should be used when applying PRO CARE GROUT REMOVER. In the event of contamination, rinse skin under cold water. Consult a doctor if irritation persists.
• Keep PRO CARE GROUT REMOVER away from pets and children.
• Do not ingest.

Dilution