TFC (Tile & Floor Care) Deep Seal is a durable twin pack urethane sealer with extra stain resistance. Deep Seal penetrates and bonds with the tile thereby strengthening, sealing and protecting the tile from wear and tear. Deep Seal is suitable for low to medium porosity* tiles e.g. Low porosity Terracotta, Black Slate, Marble, Granite & Porcelain.

Deep Seal enhances the natural colour of the tile and dries to a matt/sheen finish. Deep Seal is UV stable and may be used for interior and exterior applications. The Deep Seal will repel stains from liquids so long as the spillage is cleaned within a reasonable amount of time. Not for damming or pooling water. Deep Seal is pre measured so as to allow easy accurate mixing.

Available in 1L only at all CTM Kenya stores.

Technical data

Tips & Tricks:

• Thin, even coats are essential when using Deep Seal.
• Allow 10 – 14 days after laying the tile before sealing.
• Do not pre-seal tiles when using Deep Seal.
• Do not use paint rollers or sponges.
• Use a lint-free cloth or a Sheepskin Applicator to apply Deep Seal.
• Do not apply while floor is still damp.
• Do not allow floor to get wet for 48 hours after sealing.

Directions:

1. Read all instructions and tips before the application so that you can plan the application
   correctly.
2. Mask off any adjacent surfaces that need to be protected during the application eg skirting.
3. Test for desired results in an inconspicuous area before continuing the application.
4. Ensure that the tile is clean and free from grout, cement, oil, wax and other stains. (clean with correct Tile & Floor Care products). Remember to neutralize if the floor has been cleaned with an acid. Rinse thoroughly with clean fresh water. 
5. Strir part A well before mixing with part B.
6. Ensure that the tile is totally dry before applying the sealer. (wait approx. 48 hours after cleaning).
7. Mix the required amount of sealer by adding 1 part B (catalyst) to 4 parts A (urethane).
8. Using a suitable applicator apply a thin even coat of Deep Seal.
9. Wait for the coat to dry approx. 2 – 4 hours.
10. Apply a second coat if necessary.
11. Allow to cure for approximately 12 hours before trafficking.

Warning:

• Ensure good ventilation during the application and curing process.
• Avoid open flames during application and curing.
• Keep away from children and pets.
• Avoid contact with skin, eyes and mouth. In case of accidental ingestion seek immediate medical attention.

* - Porosity is defined as the ratio of the amount of water that a tile can contain to the weight of the tile, expressed as a percentage. A Low degree of porosity is a desirable condition for ceramic materials as they would not absorb water when especially used outdoors.